Blue Seal Evolution series G47, Инструкция по установке и эксплуатации

Страница: 5 / 25

3
Model Numbers Covered in this Specification
G47 PASTA COOKER (Single Tank - 40 Ltr).
General
A commercial heavy duty, gas fired high performance Pasta Cooker designed for pasta cooking
commercial high production output, using LPG (Propane) or Natural Gas. The boiling medium is
contained within a heavy gauge stainless steel tank, heated by one infra red surface burner from
beneath the tank.
This Pasta Cooker features an Over Temperature Safety Cut Out System with Full Flame Failure
Safety Controls.
An open tank design to make cleaning a simple and easy task.
Optional Accessories
This appliance can be fitted with the following optional accessories, (refer to the 'Replacement Parts
List' for details).
• Plinth Kit.
Gas Supply Requirements
(*) NOTE:
• (*) The burner operating pressure is to be measured at the Burner Operating
Pressure test point on the gas control valve, with the burner operating at the 'High
Flame' setting.
• NAT, LPG & Butane Only - The operating pressure is ex-factory set and is not to be
adjusted, apart from when converting between gasses, if required.
• TOWN GAS Only - The burner operating pressure is to be adjusted using the
adjustable gas regulator supplied.
• (**) Town Gas Option is only available with specific ex-factory built Town Gas
models, which can also be converted to any other gas. Standard models can only be
converted between Nat. Gas, LP Gas and Butane, but not Town Gas.
• Refer to the ‘Gas Conversion and Specifications' section of this manual for further
details.
Specifications
Natural Gas LP Gas / Butane
Input Rating 46 MJ/hr 47 MJ/hr
(N.H.G.C.) (44,547 Btu/hr)
(44,547 Btu/hr)
Supply Pressure
1.13 - 3.40 kPa 2.75 - 4.50 kPa
(4.5" - 13.5" w.c.) (11" - 18.0" w.c.)
Burner Operating
Pressure
0.92 kPa (*) 2.6 kPa (*)
(3.7” w.c.) (10.2" w.c.)
Gas Connection ¾” BSP Male
Town Gas (**)
47 MJ/hr
(44,547 Btu/hr)
0.75 - 1.5 kPa
(3" - 6" w.c.)
0.5 kPa (*)
(2" w.c.)