13
Operation
Griddle
These griddles are fitted with a pilot as a standard option and Flame Failure Protection, which is
incorporated by way of a thermo-electric system for each main burner. Flame Failure Protection will shut
off the gas supply to that burner in the event that the pilot for that burner goes out, so that un-burnt gas
is not expelled.
This is an important safety feature which is slowly becoming law throughout
the world
.
Lighting the Griddle
a. Depress the gas control knob and rotate anti-clockwise to the ‘PILOT’ position.
b. With the gas control knob depressed, press the piezo ignition button to ignite the pilot burner.
Repeat Items 1 to 2 until the pilot is lit.
c. Release the gas control knob approximately 10-20 seconds after lighting the pilot.
d. The pilot should now remain alight - if not, repeat Steps (a to (c above.
e. ‘Full Flame’ can now be achieved by depressing and rotating the gas control knob anti-clockwise
to the first stop.
f. Low flame can be achieved by depressing the gas control knob and rotating fully anti-clockwise
to the ‘Low Flame’ position.
g. When the main burner is not required, depress and turn the gas control knob clockwise back to
the ‘OFF’ position.
Turning 'OFF' the Griddle Burner / Pilot
a. To turn 'OFF' the griddle, but keep the pilot burner alight, rotate the gas control knob to the
'PILOT' position. The griddle burner will extinguish and the pilot will remain alight.
b. To turn 'OFF' the 'PILOT', depress and turn the gas control knob clockwise back to the ‘OFF’
position. The 'PILOT' burner will extinguish.
Oven Pilot Ignition
This oven is fitted with a pilot as a standard option and flame failure protection, which is incorporated by
way of a thermo-electric system for the main burner. Flame failure protection will shut off the gas supply
to the burner in the event that the pilot burner goes out, so that un-burnt gas is not expelled.
This is an
important safety feature which is slowly becoming law throughout the world
.
1.
Open the oven door.
2.
Depress the oven gas control knob and rotate anti-
clockwise to the ‘PILOT’ position.
3.
While holding the oven gas control knob depressed,
press the piezo ignition button to ignite the pilot burner.
Repeat Items 1 and 2 until the pilot burner is lit.
4.
Release the gas control knob approximately 10-20
seconds after lighting the pilot.
5.
The pilot should now remain alight - if not, repeat Steps
2 to 3 above.
6.
Ensure that the pilot burner is alight by opening the pilot
viewing covers and looking through the pilot burner
viewing holes in the cast oven sole plate.
NOTE: Ensure that the pilot viewing covers are closed once the pilot is lit.
C
AUTION
:
The griddle plate temperature reaches over 300°C in hottest points during
normal operation at 'Full Flame' setting
.
! IMPORTANT
DO NOT USE aluminium foil or trays directly on the cast iron sole plate(s).
NEVER block or cover the openings on each side of the sole plate(s).
Pilot Burner
viewing holes
Pilot Burner
Inspection Covers
Sole Plate
Fig 4
Содержание Evolution G54
Страница 7: ...5 Dimensions Dimensions G54 Cook Top Options G54D Cook Top Options G54C ...
Страница 33: ...31 ...
Страница 34: ...32 ...