manualshive.com logo in svg

Blue Seal Evolution G512, Руководство по эксплуатации

Поделиться
Скачать
Blue Seal Evolution G512 Скачать руководство пользователя страница 12

10 

Installation Requirements 

NOTE: 

• 

It is most important that this Cooktop is installed correctly and that operation is correct 
before use.  Installation shall comply with local gas, health and safety requirements. 

• 

This appliance shall be installed with sufficient ventilation to prevent the occurrence of 
unacceptable concentrations of health harmful substances in the room, the appliance is 
installed in. 

 

Blue Seal Cooktops are designed to provide years of satisfactory service, and correct installation is essential 

to achieve the best performance, efficiency and trouble-free operation. 

 

This appliance must be installed in accordance with National installation codes and in addition, in 
accordance with relevant National / Local codes covering gas and fire safety. 

 

AUSTRALIA:

 

- AS5601  

- Gas Installations. 

NEW ZEALAND:

 

- NZS5261  

- Gas Installation. 

 

Installations must be carried out by qualified service persons only.  Failure to install 

equipment to the relevant codes and manufacturer’s specifications shown in this section will 

void the warranty. 

 

Components having adjustments protected (e.g. paint sealed) by the manufacturer are only  
allowed to be adjusted by an authorised service agent. They are not to be adjusted by the 

installation person. 

 

Unpacking 

• 

Remove all packaging and transit protection from the appliance including all protective plastic 
coating from the exterior stainless steel panels. 

• 

Check equipment and parts for damage.  Report any damage immediately to the carrier and 
distributor. 

• 

Report any deficiencies to the distributor who supplied the appliance. 

• 

Check that the available gas supply is correct to that shown on the Rating Plate attached to the 
underside of the R/H side, front Cooktop lower trim, for Bench, Cabinet Base and Leg Stand Models.  
For the Refrigerated Base Models the rating plate is located inside the right hand front panel and can 

be viewed through the upper grille. 

 

Location 

1. 

Installation must allow for a sufficient flow of fresh air for the combustion air supply. 

2. 

Installation must include adequate ventilation means, to prevent dangerous build up of combustion 
products. 

3. 

Never directly connect a ventilation system to the appliance flue outlet. 

4. 

Position the appliance in its approximate working position. 

5. 

All air for burner combustion is supplied from underneath the appliance.  The legs must always be 

fitted and no obstructions placed on the underside or around the base of the appliance, as 

obstructions will cause incorrect operation and / or failure of the appliance. 

 

NOTE:  Do not obstruct or block the appliances flue.  Never directly connect a ventilation system to 

the appliance flue outlet. 

Installation

 

Natural Gas

 12 

m

3

/hr 24 

m

3

/hr 36 

m

3

/hr 48 

m

3

/hr 

LPG / Butane

 12 

m

3

/hr 25 

m

3

/hr 38 

m

3

/hr 50 

m

3

/hr 

Combustion Air Requirements: 

 

G512 G514 G516 

G518 

Town Gas 

12 m

3

/hr 24 

m

3

/hr 36 

m

3

/hr 48 

m

3

/hr 

Содержание Evolution G512



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды