Blue Seal E9311, Руководство по обслуживанию

Страница: 27 / 50

-27-
Revision 4/F3544
Convection Oven © Moffat Ltd, April 2005
Two Screws
6.3 REPLACEMENT
6.3.1 LIGHT BULB / GLASS
6.3.2 DOOR MICROSWITCH
1) Unscrew lamp cover.
1) Remove service panel (refer 6.2.2).
2) Remove two screws holding microswitch
to bracket.
6.3.3 INDICATOR NEON LIGHT
1) With control panel open (refer 6.2.1)
remove the wires from the back of the
neon.
2) Unscrew bulb out of fitting.
3) Screw in replacement bulb.
4) Ensure seal fitted. Screw lamp cover into
holder with baffle fitted (do not over
tighten).
Lamp
Cover
Figure 6.3.1
3) Transfer wires to new micro-switch and
re-assemble.
4) Adjust microswitch (refer 6.4.2).
Figure 6.3.2
1) Remove the nine screws securing the
hob back panel to the unit.
6.2.5 HOB (COOK TOP)
2) Remove both fuses.
3) Remove the two screws securing the
retaining clamp to the centre rear of the
hob.
Hob Back
Panel
Figure 6.2.6
4) Lift out hob for servicing.
Two
Screws
Figure 6.2.7
6.2.6 HOB BASE PANEL
1) Remove hob (refer 6.2.5).
2) Turn the hob over and remove eight
screws securing the base panel to the
hob.
Figure 6.2.8
Screws
(Eight)