6
Service Procedures
Revision 1/
©
Moffat Ltd, January 2007
Blue Seal Evolution Series Electric Bratt Pans
21
Figure 6.2.16a
Figure 6.2.14
6.2.14 Push Button Switch Block
(Electric lift models)
6.2.15
Control Button
(Electric lift models)
1) Remove left frontr panel (refer 6.1.2).
2) Undo screw securing contact block to rear of
push button.
3) Remove contact block and transfer wires to
new contact bock.
4) Fit new contact block and reassemble.
1) Remove both contact blocks from rear of the
control button (refer 6.2.14).
2) Remove base from push button by unclipping,
using a small screwdriver or similar tool.
3) Undo nut securing the push button to the
switch mounting plate.
4) Replace and reassemble in reverse order.
6.2.16
Lift Motor
(Electric lift models)
1) Remove left and right front panels (refer
6.1.2 and 6.1.3)
2) Disconnect four wires to lift motor from
connector block.
Connector block
3) Remove through bolt connecting motor to
lead screw.
4) Remove three bolts securing motor to bratt
pan frame and remove motor.
5) Replace motor and reassemble in reverse or-
der.
Lead screw
Lift motor
Through bolt
Figure 6.2.16b
Figure 6.2.17
Motor mounting bolts
