®
LP Gas Outdoor Fireplace
Model No. GAT16010L
6
Assembly Instructions (continued)
Installing LP Gas Tank
This outdoor fireplace is designed to operate with a
1 lb . 7 .75 in . or 10 .6 in . high disposable / 16 .4 oz . or
14 .1 oz . propane gas tank (DOT 39 Cylinder) (Figure 1) .
DO NOT ATTEMPT TO REFILL ANY 1 lb. (16.4 oz. or
14.1 oz.) PROPANE GAS TANKS!
Connecting LP Gas Tank
Only cylinders marked “propane” may be used.
Note: 1 lb cylinders may form frost when near empty .
1 . Before connecting, be sure there is no debris
caught in the head of the LP gas tank, head of
the regulator valve or in the head of the burner or
burner ports .
2 . Make sure the regulator/control knob is in the
“ OFF” position (Figure 2) .
3 . Lubricate the threads of the regulator/control
knob with petroleum jelly . Line up threads on LP
gas tank with regulator/control knob .
4 . Insert and rotate LP gas tank clockwise until
they fit snugly together . HAND TIGHTEN ONLY . Be
careful not to crossthread when screwing in tank
(Figure 3) .
5 . Perform leak test per “Checking for Leaks”
section .
Disconnecting LP Gas Tank
1 . Turn the regulator/control knob to the “ OFF”
position (Figure 2) .
2 . Rotate LP gas tank counterclockwise until it is
detached (Figure 4) .
3 . Store the LP gas tank in a proper location, per
instructions on the LP gas tank .
W
CAUTION: LP gas tank must be
properly disconnected and removed
prior to moving this outdoor fireplace.
4 . Place the protective cap cover on the LP tank and
store the tank outdoors in a well ventilated area
out of direct sunlight .
Figure 1
1 lb
453 g
7.75 in.
/ 19,7 cm
3.875 in. / 9,8 cm
2.9 in. / 7,4 cm
1 lb
465 g
10.6 in.
/ 27 cm
Figure 2
OFF / APAGADO
Figure 3
Figure 4
5
Place Cover
W
WARNING: NEVER light the burner with the cover on the
outdoor fireplace.
