BP301
www.bpfasteners.com
Page 2
WARNING!
PRIOR TO OPERATING THE BP301 TOOL, PLEASE STUDY THIS MANUAL CAREFULLY AND DEVELOP A
THOROUGH UNDERSTANDING OF THE CONTENTS. PROPER TRAINING ACCORDING TO THE CURRENT ANSI
STANDARD A 10.3, SAFETY REQUIREMENTS FOR POWDER ACTUATED FASTENING SYSTEMS MUST BE
COMPLETED AND A BLUE POINT FASTENERS QUALIFIED OPERATOR CARD MUST BE OBTAINED PRIOR TO
OPERATION OF THE TOOL. STATE, LOCAL, OR OTHER REGULATIONS SHOULD ALSO BE FOLLOWED. LAWS,
REGUATIONS, AND STANDARDS REGARDING THE USE OF POWDER ACTUATED TOOLS MAY PERIODICALLY BE
REVISED WITHOUT NOTICE. ANY SUCH REVISIONS MAY CHANGE THE SAFETY AND OPERATING PROCEDURES
DESCRIBED IN THIS MANUAL. BLUE POINT FASTENERS, INC. IS NOT RESPONSIBLE FOR ANY SUCH REVISIONS
WHICH OCCUR AFTER PUBLICATION OF THIS MANUAL. IT IS THE RESPONSIBILITY OF THE USER TO MAINTAIN
ALL KNOWLEDGE OF THE LAWS, REGULATIONS, AND STANDARDS THAT APPLY TO THE POWDER ACTUATED
TOOLS.
DANGER! TO AVOID SERIOUS INJURY OR DEATH:
NEVER PLACE YOUR HAND AT THE END OF THE FASTENER GUIDE OF THE BP301 TOOL.
OPERATORS AND BYSTANDERS AROUND THE TOOL BEING USED MUST USE EYE AND EAR PROTECTION.
ALWAYS ASSUME THAT THE TOOL IS LOADED WITH A LOAD. NEVER PLACE YOUR FINGERS ON THE TRIGGER OF
THE LOADED OR UNLOADED TOOL UNTIL THE TOOL FASTENER GUIDE IS AGAINST THE WORK BASE AND YOU
ARE READY TO DO A FASTENING. IF THE TOOL ACCIDENTALLY SHOOTS HIS/HER HAND OR ANY PART OF THE
BODY, THE PISTON CAN ENTER THE BODY AND CAUSE SERIOUS INJURY OR DEATH.
IT IS VERY IMPORTANT THAT THE OPERATOR OF THIS BP35 TOOL READS AND UNDERSTANDS THE FULL
MANUAL OF THE TOOL AND COMPLETED THE OPERATORS EXAM WITH A 100% GRADE. THE WARRANTY DOES
NOT APPLY UNTIL BLUE POINT FASTENERS, INC. RECEIVES A COPY OF OPERATORS EXAM AND A COPY OF YOUR
RECEIPT WHEN THE TOOL WAS PURCHASED.
WARRANTY
All warranties or products described herein, express or implied, including the warranties of merchantability or
fitness for a particular purpose, are specifically excluded, with the following exceptions: Blue Point Fasteners
will repair or replace, at its option, any tool, part or element holding that, within 90 days after the sale. If Blue
Point is found to be responsible for a defective part in material or workmanship, excluding normal wear. THIS
IS THE ONLY WARRANTY AND REMEDY BLUE POINT HAS AVAILABLE AND IS IN NO EVENT FOR ANY DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY OTHER DAMAGES, is available.
