Blue Pneumatic BP-20CR, Инструкция по эксплуатации, Страница: 8 / 8

tool,to ensure the correct operation,please read this instruction manual
carefully and place it in a safe area for reference.
rivet tool.
you are using.
trouble caused by operation with other devices.
instruction manual.
non-original lithium batteries.
j aw damaged
Trouble shooting
Symptom
Possible cause Remedy
Difficult to
pull the rivet
Grasp the
rivet skid
Stuck when pull
out the rivet
Rivet no action
j aw damaged
Change j aw
Charge or replace the battery
Change j aw
j aw dirty
Clean the j aw and fill the
lube oil
Top tube spring failure
Change top tube spring
The riveter nozzle is not
correct
Use the proper riveter nozzle
j aw dirty
Clean the j aw and fill the
lube oil
The j aw tube, nozzle or
nozzle housing of the gun
are not screwed tight
j
nozzle housing
Rivet rod plug the nozzle
Change the proper nozzle or
check the degree of wear of
j aw sleeve
The battery is power off
or low voltage
Charge or replace the battery
Beyond the ability of the
riveter Change to use correct of
riveters
The guide bar is stuck by
mandrel
Change the proper guide bar
and clean the mandrel bottle
Battery under voltage
6