Page 3 of 8
292-2726 Rev. C
7/20/10
Attachment Tabs:
Due to the design of the removable tabs, the
RangeFinder II and Ambassador tow bars can not
be used. Adapters, except the BX8833 and the
BX88151, can not be used with this baseplate.
Instructions:
The front fascia, headlights, horn bracket,
and bumper are removed for the baseplate
installation. Drilling is required. Trimming of
the air dam is required.
The dimensional variations between otherwise
identical vehicles can be considerable.
While the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufacturer’s tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods or bending end plates.
The BX8869 Bulb and Socket Wiring Kit is
recommended for this vehicle.
1. Remove 12 pushpins from the plastic above the
radiator. Remove the plastic from the top of the
radiator. Set pushpins aside to reinstall later.
2. Just forward of the front tire, on the edge of the
fascia, use an 8MM socket or Phillips screwdriver
to remove one metric bolt. Set bolt aside to reinstall
later. Do this to both sides of the vehicle.
2
2
2006-10 Honda Ridgeline
Installation Instructions
BX2239
1
1
Installation Instructions:
Possible Location for the BX8869
Possible Location for the BX8869
Bulb and Socket Wiring Kit.
Bulb and Socket Wiring Kit.
Handling of some cosmetic parts
when installing this product may
require the use of protective covers,
rags, specialty tools, etc. to prevent
damage.
