background image

BX2198

2006-10 Ford Explorer/Mercury Mountaineer

2007-10 Ford Explorer Sport Trac 

Installation Instructions

292-2993 Rev. E 

Page 1 of 9 

10/19/09

Please read BOTH these Installation Instructions and the General 

Instructions before attempting to install or operate this equipment.

1.    Blue Ox

®

 towing products and accessories are 

intended to be installed by Blue Ox

® 

Dealers 

who are familiar with our products and have the 

necessary equipment and knowledge to do “fit 

work”. When necessary Blue Ox

®

 Dealers can be 

found at 

www.blueox.com

 or by contacting our 

Customer Care Department at (402) 385-3051 or 

toll free at (800)228-9289.

2.    Many Blue Ox

®

 baseplates are designed to 

use existing holes and hardware to mount the 

baseplate to the towed vehicle. Even though 

bolts are there, do not assume they are adequate 

for baseplate mounting. Always use hardware 

supplied in the hardware kit and existing 

hardware specified in the Baseplate Installation 

Instructions. 

Confirm the towability and pre-towing 

procedures for your vehicle with 

the owner’s manual or contact the 

vehicle’s manufacturer for specific 

towing procedures. 

Attachment Tab Height: 

24”

Attachment Tab Width: 

20”

Bolt Size Grade 5 Grade 8

1/4”

10

14

5/16”

19

29

3/8”

33

47

7/16”

54

78

1/2”

78

119

5/8”

154

230

Bolt Torque Specifications 

Torque in Foot-Pounds for Inch Bolts

 

Bolt Torque Specifications 

Torque in Foot-Pounds for Metric Bolts 

Bolt Size Grade 8.8 Grade 10.9

6MM

6

8

8MM

16

22

10MM

31

40

12MM

54

70

14MM

89

117

Serial Number

!

Failure to read and follow these instructions 

could result in separation of the towed vehicle 

from the tow bar, causing property damage, 

loss of towed vehicle, personal injury or death.

WARNING

Содержание BX2198










Отзывы: