BX2198
2006-10 Ford Explorer/Mercury Mountaineer
2007-10 Ford Explorer Sport Trac
Installation Instructions
292-2993 Rev. E
Page 6 of 9
10/19/09
12
13
11
11. Using the baseplate as a template, drill
the two (2) holes in the side of the frame
rail with the 17/32” drill bit. Do this to both
sides of the vehicle. Protect coolant pipe
line when drilling (note the section of pipe
on the drill bit).
13. Insert the bent end of coolant bracket
into the smaller front hole provided in
baseplate on the passenger’s side. Drill
the self drilling screw in bracket hole
provided in baseplate and into frame.
12. Insert the 1/2”-13 whiz nuts to align with
the drilled holes inside the frame rail and
tighten the 1/2”-13 x 1-3/4” hex bolts and
1/2” lock washers. Do this to both sides of
the vehicle. Cut nut plate wires to make
them flush with the end of the frame rail.
This prepares the area for the metal
bumper reinstallation.
BE SURE TO USE LOCTITE
®
RED ON ALL BOLTS
BEFORE TIGHTENING. TIGHTEN ALL BOLTS
ACCORDING TO THE TORQUE CHART.
