•
Installation must be made in accordance with the Plumbing Code of Australia (PCA)
by a licensed plumber only.
•
Observe the use limits indicated on the filter label.
•
If pressure exceeds use limits, protect with a pressure reducer.
•
Install an “anti-water hammer” system to protect the filter.
•
Keep away from light sources.
•
Keep away from excessive heat and cold (min. 4ºC, max 45ºC).
•
Only use original Blue Mountain Co cartridges.
The use of non-original cartridges may void the warranty.
GENERAL REQUIREMENTS
•
Filter Housing
•
Pre Filter Self-Cleaning Cartridge
Stainless Steel Net Catridge
•
Filter Cartridge(s)
Heavy-duty Sediment Cartridge*
Multi-Action Filter Cartridge
•
Housing Ring Spanner
•
Wall bracket & screws
•
Cartridge Centering Device
•
Discharge Kit
•
Tape measure
•
Marker pen
•
Pipe cutters
•
Deburring tool
•
PTFE (Teflon thread tape)
•
2 Threaded adaptors
(Isolation valve and refer to installation layout
and existing pipework for further information.)
•
Adjustable wrench
•
Screw driver
•
Drill
•
Anchors (for mounting bracket)
WHAT’S IN THE BOX?
TOOLS/MATERIALS YOU MAY REQUIRE
*For Three-Stage systems only
CAUTION:
Do not use with water that is microbiologically unsafe or with water of unknown
quality without adequate disinfection before or after the system. Systems certified for cyst
reduction may be used on disinfected water that may contain filterable cysts. If not properly
maintained, the use of this system may increase the bacterial content of the water unless
supplementary treatment is provided.
