background image

I. Safety Warnings: 

Be extremely cautious to rotating blade in machine. 

1.

 

Never allow hand, foot, or any part of body enter hopper.   

2.

 

Never place hand, foot or any part of body closed to discharge opening while machine in 

operation. 

3.

 

Do not peer into hopper or discharge opening when the machine is running. 

4.

 

Never allow metal objects or something similar into machine. 

5.

 

Never allow children to operate machine. 

6.

 

Never operate your shredder-chipper under the influence of alcohol, drugs, or medication. 

7.

 

Never assemble or disassemble any parts of machine when in operation. 

8.

 

Never allow children, pets, and bystanders in operation zone. Keep them in a minimum of 

10 meters far.   

9.

 

Never run machine in an enclosed area since exhaust from engine contains carbon 

monoxide. 

10. Never wear loose clothes or long jewelry and keep your long hair under a headgear when 

operating machine. 

11. Never use machine on a slope or hard smooth floor. 

II. Assemble Instructions. 

Unpack and check contents. 

Remove all the items from the crate. If any part is missing, contact your place of purchase at 

once. 

Assembly should be done on a clean, level surface with a helper. 

1.

 

Remove the machine from the crate and put it on                                                                 

a wood shelf. See picture 1. 

 

 

 

 

Содержание CS-65












Отзывы: