BLUE INK TECH ELD, Руководство пользователя, Страница: 14 / 39

Hours of Service (continued)
Adding a Record of Duty Status
To add a duty status tap the green “+” button
and select “Add Duty Status.” This will open the
menu shown to the left.
Tap the duty status you want to enter and add
any relevant notes. The time and location will
be automatically filled out with the current time
and location.
Tap in the “Time at Home Terminal” field to
change the time. This will allow you to insert a
duty status at a previous time. You may insert
a duty status at any time as long as it does not
conflict with automatically recorded Drive Time.
You can also quickly set your duty status by
tapping the blue circle in the Current Load Out
section on the Home page.
Editing a Record of Duty Status
To edit a duty status, tap the “EDIT” icon to the
right of the duty status listed on the Hours of
Service screen. This will bring up the detail
screen where you can adjust the time, select a
different duty status, and modify your notes.
All edits to duty status require a note of at
least four characters. Your previous record will
be marked as inactive and the new record with
your changes will be marked as active.
You can also delete a duty status, which will
mark that record as inactive.
FMCSA Mandate Requirement: If the BIT
ELD adapter detected the vehicle as in-
motion, then a change of status to a non-
driving status will NOT be allowed. You will
NOT be able to add a non-driving status in the
middle of a period of time detected as in-
motion. Messages will alert you if these
conditions occur.
14