OPERATING INSTRUCTIONS/
AA
4. Use screws (AA) to mount the rope cleat (B) to the wall. DO NOT CUT THE
ROPE. When the bicycle is up to the ceiling, the excess rope should be
wrapped around the cleat.
Using the Bicycle Lift
Hook the bicycle handlebar and seat with the hooks and be sure the ropes are
not twisted.
The bicycle can now be raised to the ceiling by pulling the rope.
The rope will lock in place with each pull, preventing the bicycle from falling.
For safety, tie the rope on the cleat and wind the excess rope around it. DO
NOT CUT THE ROPE.
Lowering the Bicycle
Pull rope toward back pulley maintaining tension on rope (see figure).
The tension will keep the locking mechanism open and it will be possible to
lower the bicycle.
Slowly let the rope out as the bicycle lowers.
Once the bicycle is low enough, remove it from the hooks and tie the rope back
to the cleat.
4
3
B