manualshive.com logo in svg

Blue Giant STRONGARM ML10, Руководство пользователя

Поделиться
Скачать
Blue Giant STRONGARM ML10 Скачать руководство пользователя страница 6

PELIGRO

6

STRONGARM™ ML10 VEHICLE RESTRAINT—OWNER’S MANUAL

ISSUE DATE: SEPTEMBER 29, 2014 REV.0 (PART # 038-538E)

DANGER

DANGER

DANGER

DANGER

3.0  SAFETY MESSAGE COLOR IDENTIFICATION

This manual includes color-coded safety messages that clarify instructions and specify areas where potential hazard exists. To prevent 
the possibility of equipment damage and serious injury or death, please observe strictly the instructions and warnings contained in 
the messages. If warning decals become damaged or missing, replace them immediately. Avoid accidents by recognizing dangerous 
procedures or situations before they occur.

Serious injury or death will likely occur if the 

instructions are not followed.

Serious injury or death may occur if the 

instructions are not followed.

Procedures marked notice must be followed in order 

to prevent damage to machinery.

Instructions marked caution concern safe operating procedure.  

Failure to comply may result in personal injury.

3.1  OPERATIONAL SAFETY WARNINGS

1.  Installation must be performed only by trained and authorized personnel.
2.  Prior to installation, place adequate barriers to prevent vehicle traffic from entering the work area.
3.  During installation, anchors must be properly torqued to achieve the necessary anchoring strength. DO NOT USE IMPACT DRIVERS.
4.  Any electrical work must be performed by qualified personnel only.
5.  Do not remove the wheel chocks until loading /unloading is finished and the truck is cleared for departure or the vehicle restraint has been 

released and the lights have changed to RED inside and GREEN outside.

WARNING

DANGER

1.  Do not operate the dock equipment while anyone is standing in its path.
2.  Lift the dock equipment with suitable hoisting equipment only. Do not 

stand under the dock equipment or any heavy object while it is being 
hoisted.

3. 

BEFORE BEGINNING ANY SERVICE PROCEDURES:

  

Disconnect the power and follow all lockout / tagout procedures outlined 
in this manual.

Keep hands and feet away from operating space of the 
restraint apparatus.

CRUSH

HAZARD

1.  Only trained personnel should operate or service this equipment.
2.  Do not operate the dock equipment until the transport vehicle is parked against the dock bumpers.
3.  Always park the dock equipment after use.
4.  Conduct routine inspections and maintenance. Failure to do so could cause equipment damage and or personal injury.
5.  Always call your authorized service representative or manufacturer immediately if a malfunction occurs.
6.  Always return the restraint arm to the parked position after use.

1.  Do not ground welding equipment to any electrical components.
2.  Do not allow the drill to go too deeply into the control box, as damage may occur to the control systems.
3.  Never use air to blow debris from the control box. Use a vacuum to perform any necessary cleaning.
4.  Do not connect green ground lead into control box or junction box until all welding has been completed.
5.  If an extension plate / box is required, securely mount it on the restraint with hardware provided before shimming and drilling.
6.  Improper adjustments and / or lubrication may cause operational problems with equipment.

DANGER

NOTICE

CAUTION

WARNING

DANGER

NOTICE

CAUTION

1.  Installation must be performed only by trained and authorized personnel.
2.  Prior to installation, place adequate barriers to prevent vehicle traffic from entering the work area.
3.  During installation, anchors must be properly torqued to achieve the necessary anchoring strength. DO NOT USE IMPACT DRIVERS.
4.  Any electrical work must be performed by qualified personnel only.
5.  Do not remove the wheel chocks until loading /unloading is finished and the truck is cleared for departure or the vehicle restraint has been 

released and the lights have changed to RED inside and GREEN outside.

Содержание STRONGARM ML10

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды