19
STRONGARM™ ML10 VEHICLE RESTRAINT—OWNER’S MANUAL
ISSUE DATE: SEPTEMBER 29, 2014 REV.0 (PART # 038-538E)
10.3 ENGAGING RESTRAINT
Activate the ML10 by using the control rod to press down on
the engagement arm until the restraint arm is in the fully vertical
position, holding the ICC bar in place.
TLC24-A
: The control station light will turn GREEN and the outside
traffic light will turn RED in auto mode.
TLC24-M
: Turn the key switch to the 'Interlocked' position (green
LED light). The outside traffic light changes to RED while GREEN
light on the control station comes on.
NOTE:
The truck / trailer is NOT restrained if the arm is not fully
vertical. Do not switch the TLC24-M to green until you have
confirmed the restraint arm is fully deployed and locked in.
TLC24-A
TLC24-M
OUTSIDE TRAFFIC
LIGHT STATUS
INSIDE COMMUNICATION
LIGHTS & CONTROL STATION
PERFORM LOADING AND UNLOADING
10.4 RELEASING THE RESTRAINT ARM
After loading / unloading has been completed and the dock leveler
is safely parked, release the restraint arm by pulling up on it quickly
and firmly using the control rod. The arm will return to the parked
position.
TLC24-A
: The control station light will turn RED and the outside
traffic light will turn GREEN in auto mode.
TLC24-M
: turn the key switch to the 'No Traffic' (red LED light)
position. The outside traffic light changes to GREEN and the
control station light turns RED.
NOTE:
If the ICC bar is applying pressure to the restraint arm, it
may be necessary to have the driver back up the vehicle before
releasing the arm.
TLC24-A
TLC24-M
OUTSIDE TRAFFIC
LIGHT STATUS
INSIDE COMMUNICATION
LIGHTS & CONTROL STATION
OPPOSITE SIDE
