Blue Flame BFCO-1, Руководство по установке и эксплуатации

Страница: 20 / 40

20
ADJUSTING DOOR SWITCH
Thedoorswitchdetectswhenthe oven doors areopen.Asadjustedatthefactory,when thedoorsare
openedmorethan2to4inches,theburnersandfanshouldshut off(unlessthefanisswitchedto “COOL” mode). To
adjust the door switch, do thefollowing:
1. Remove lower front panel that covers the doorchain mechanism.
2. Close both doors.
3. Checkthatthedoor switch cam is operating the door switch.
!
CAUTION
DoNOTadjustthedoorswitchsothattheplungerarmiscompletelydepressedandishittingthe switch body.
Thiscould distort the arm and cause the switch to operate poorly.
TEMPERATURE CONTROLLER
Temperaturecontrolleris set at the factory and should only be changed or adjust by a qualified service
technical.
T
ROUBLESHOOTING
!
WARNING
ADJUSTMENTSANDSERVICEWORKMAY BEPERFORMED ONLYBYA QUALIFIED TECHNICIAN WHO
IS EXPERIENCED IN, AND KNOWLEDGEABLE WITH, THE OPERATION OF
COMMERCIALCOOKINGEQUIPMENT.HOWEVER,TOASSURE YOUR CONFIDENCE, CONTACT YOUR
AUTHORIZED SERVICE AGENCY FOR RELIABLE SERVICE, DEPENDABLE ADVICE OROTHER
ASSISTANCE, AND FOR GENUINE FACTORY PARTS.
NOTICE
Warrantywillbevoidandthemanufacturerisrelievedofallliabilityifserviceworkisperformedby other than
aqualified technician, or if other than genuine replacement parts are installed.
Incaseofproblemsinoperationatinitialinstallation,checktypeofgasandmanifoldpressureand compare
withinformation listed on theserial plate. The serial plateis located inside the lower front panel.
PERFORMANCE STANDARD
Thetypicaltimefortheoventoheatfrom75°Fto350°Fis5to6minutesforovensusingnaturalgas,and 7 to 8 minutes
for ovens using propane.
Theburnersshouldcome onwhentheactualoventemperaturedropsto10°Fbelowthetemperature setting.