CASTING ASSEMBLY CONTINUED
DANGER
DANGER: DO NOT PASS HOSE ABOVE SHIELD HOSE MUST NOT
TOUCH ANY PART OF THE BASE
WARNING:
ENSURE HOSE ASSEMBLY DOES NOT CONTACT THE
CASTING, OR ANY OTHER PARTS WHICH WILL GET HOT.
!
WARNING
!
REGARDING IMPROPER ASSEMBLY OF HOSE
ON PROPANE AND NATURAL GAS FG/FGQ/FGF500 MODELS
DURING THE ASSEMBLY PROCESS OF THE BASE ASSEMBLY STEP, THE CUSTOMER NEEDS TO
ENSURE THAT THE HOSE IS UNTIED FROM BURNER BEFORE FINAL ASSEMBLY. CUSTOMER
SHOULD RELEASE THE TIE AND PASS THE HOSE THROUGH THE GAP BETWEEN HEAT SHIELD
AND FRONT PANEL BEFORE ASSEMBLING THE FIREBOX (BASE) TO THE CART (CABINET).
NATURAL GAS (NG) HOSE MUST PASS THROUGH THE GAP AND THAT IS DIRECTED TO THE
BOTTOM OF CABINET. PROPANE HOSE/REGULATOR SHOULD ALSO DIRECTED THROUGH THE
GAP TO THE CYLINDER UNDERNEATH THE HEAT SHIELD.
FIG.8
• Secure base casting as shown.
30
Important
For Natural Gas
models, direct the
hose through the
hole in the base as
shown.
FOR NATURAL GAS MODELS
