Blue Diamond POWER RAKE, Руководство по эксплуатации и обслуживанию

Страница: 22 / 52

22
Power Rake Operation and Maintenance Manual
Operation
Operating The Attachment
Machine Requirements
• The machine must be equipped with a case
drain.
Skid Steer Requirements
Clearing Work Area
IMPORTANT
• DO NOT operate in a work area that has
not been cleared of foreign debris and
obstacles.
• Rocks, metal, construction debris and
other objects can damage the power
rake.
• Clearly mark any objects that cannot be
removed.
• If an area contains tall grass, clear cut
the area first, either by mowing or tilling
the ground.
Initial Setup
NOTE: The ground conditions will determine the
best settings for the power rake. Choose
the mode that’s right for the application.
Tilling Mode
Removing the side shields converts the power
rake into tilling mode.
Removing the side shield and opening up the
material bar hold back rubber shield will allow for
material flow when in tilling mode.
NOTE: When in tilling mode and in hard pack soil
- gravel, adjust the angle to 10 or 20
degrees for aggressive sawtooth action.
NOTE: Adjust the angle to 10 or 20 degrees for
material windrowing (such as rocks and
debris).
Landscaping Mode
For landscaping, side shields are installed and
material bar set to desired gap.
NOTE: The side shields contain the material in
front of the rotor while the clean material
passes between rotor and material bar
rubber shield.
Gauge Wheels
Adjust the gauge wheels if necessary. See page
32.
Skid Plates
If equipped with skid plates adjust if necessary.
See page 32
.
POWER RAKE GPM REQUIRED
Power Rake
15 GPM