Blue Diamond EXTREME DUTY SNOW BLOWER 68 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 70

Blue Diamond EXTREME DUTY SNOW BLOWER 68 Скачать руководство пользователя страница 26

26

Extreme Duty Snow Blower Operation and Maintenance Manual

Operation

Attachment Control Harness

Connecting Attachment Control Harness

Remove  storage  cap  on  the  machine  and
snowblower  control  harness  ends.  Route  and
connect  the  snow  blower’s  attachment  control
harness  to  the  machine  attachment  control
connector bulkhead.

Secure harness to route with

existing snowblower hoses.

Disconnecting Attachment Control Harness

Disconnect the snow blower attachment control
harness from the attachment control connector
bulkhead. Replace storage caps on the bulkhead
and snow blower connector ends.

Disconnecting Attachment From The

Machine

Relieve auxiliary hydraulic pressure. (See the
machine’s Operator’s Manual for correct
procedure.)

Park the machine and attachment on a flat level
surface. Lower the attachment flat on the ground.

Leave the operator’s position. (See “Leaving The
Operator’s Position” on page 24.)

Disconnect attachment hydraulic hoses from the
machine.

Disengage locking pins / wedges. (See the
machine’s Operator’s Manual for correct
procedure.)

Enter the operator’s position. (See “Entering The
Operator’s Position” on page 24.)

Slowly tilt the machine’s mounting plate forward
until the attachment mounting frame is free from
the machine’s mounting plate.

Drive the machine slowly backward, away from
the attachment.

«
...
24
25
26
27
28
...
»

Содержание EXTREME DUTY SNOW BLOWER 68







































































Отзывы:

Нет отзывов