Blue Diamond EXTREME DUTY SNOW BLOWER 68 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 70

Blue Diamond EXTREME DUTY SNOW BLOWER 68 Скачать руководство пользователя страница 25

25

Extreme Duty Snow Blower Operation and Maintenance Manual

Operation

Connecting Attachment To The Machine

Cont’d

Stop the engine and engage the parking brake.

Leave the operator’s position. (See “Leaving The
Operator’s Position” on page 24.)

Engage attachment locking levers / wedges (See
the machine's Operator’s Manual for detailed
information).

Visually inspect that the wedge pins are securely
fastened into the snow blower mounting frame.

WARNING

AVOID SERIOUS INJURY OR DEATH

The  locking  pins  /  wedges  must  extend
through  the  holes  in  the  attachment
mounting  frame.  Failure  to  secure  locking
pins / wedges can allow attachment to come
off.
SEE  MACHINE’S  OPERATOR’S  MANUAL
FOR ADDITIONAL INFORMATION.

Connecting Hydraulic Hoses

IMPORTANT

Thoroughly clean the quick couplers before
making connections. Dirt can quickly
damage the hydraulic system.

Remove  dirt  or  debris  from  the  male  and  female
couplers.  Visually  inspect  the  couplers  for
corroding,  cracking,  damage,  or  excessive  wear.
Replace as needed.

Connect the attachment hydraulic hoses to the
machine. Pull on each hose to verify full
connection is made.

Disconnecting Hydraulic Hoses

WARNING

AVOID BURNS

Hydraulic fluid, tubes, fittings and quick
couplers can get hot during operation. Be
careful when connecting and disconnecting
hydraulic hoses.

Relieve auxiliary hydraulic pressure. (See the
machine’s Operator’s Manual for correct
procedure.)

Disconnect attachment hydraulic hoses from the
machine.

«
...
23
24
25
26
27
...
»

Содержание EXTREME DUTY SNOW BLOWER 68







































































Отзывы:

Нет отзывов