Blue Coat ProxySG 9000 Series, Руководство по соответствию

Страница: 5 / 14

SG9000 Tamper Evident Panel and Label Installation
5
Label Replacement
If you incorrectly apply a label onto the appliance or need to replace an existing label,
you must thoroughly clean the label surface to remove all traces of the adhesive before
attempting to reapply a label. If the adhesive is not completely removed, the new label
will not correctly adhere to the surface.
To clean the adhesive residue and other contaminants after a label is removed:
Step 1: Remove traces of the silicone adhesive evidence by throughly cleaning the
surface using an alcohol swab.
Step 2: Remove any remaining surface contaminants using a cotton round.
Step 3: Repeat if necessary.
Before You Begin
If the Blue Coat appliance is already rack-mounted and operating, Blue Coat
recommends powering it down, removing the system from the rack, and creating a
workplace with ample room to maneuver around the unit.