Replacing Compact Flash Card on ProxySG 300
3
Safety Warnings and Cautions
Caution:
This product is designed to work with power systems having a grounded neutral. To reduce the
risk of electric shock, do not plug this product into any other type of power system. Contact a qualified
electrician if you are not sure what type of power is supplied to your building.
Power and Electrical Warnings
CAUTION
•
The power button, indicated by the stand-by power marking, DOES NOT completely turn off the
system AC power. 5V standby power is active whenever the system is plugged in. To remove
power from system, you must unplug the AC power cord from the wall outlet. If your system
uses more than one AC power cord, make sure all AC power cords are unplugged before you
open the chassis, or add or remove any non hot-plug components.
•
The power supply in this product contains no user-serviceable parts. Do not open the power
supply. Hazardous voltage, current, and energy levels are present inside the power supply.
Return to manufacturer for servicing.
•
To avoid risk of electric shock, turn off the appliance and disconnect the power cord,
telecommunications systems, networks, and modems attached to the appliance before opening
it.
•
The power cord set included with the appliance meets the requirements for use in the country
of purchase. Use the power cord that shipped with the appliance. If this appliance is to be used
in another country, purchase an AC power cord set that is approved for use in that country (18
AWG recommended).
•
The power cord must be rated for the product and for the voltage and current marked on the
product's electrical ratings label. The voltage and current rating of the cord should be greater
than the voltage and current rating marked on the product. In addition, the cross-sectional area
of the wires must be a minimum of 1.00mmð or 18AWG or 18AWG, and the length of the cords
must be between 1.8m (6 feet) and 3.6m (12 feet).
System Access Warnings
CAUTION
To avoid personal injury or property damage, the following safety instructions apply whenever accessing
the inside of the product:
•
Turn off all peripheral devices connected to this product.
•
Turn off the system by pressing the power button to off.
•
Disconnect the AC power by unplugging all AC power cords from the system or wall outlet.
•
Disconnect all cables and telecommunication lines that are connected to the system.
•
Retain all screws or other fasteners when removing access cover(s). Upon completion of
accessing inside the product, refasten access cover with original screws or fasteners.
