17
can cause the detergent injector to clock and not function properly.
• Remove high pressure hose from spray gun and unscrew the other end of the high pressure hose
from the power washer.
• Wrap the power cord around the L-shaped tabs on the right side of the machine when facing it.
• The pressure hose is stored on the hose hook located on the back of the handle.
• DO NOT store the power washer where it is exposed to freezing temperatures unless
you use Pump Saver.
It is recommended that you use Pump Saver for storing in freezing
temperatures. Freezing will damage the pump unless Pump Saver is added to the power washer.
If not using or if storing your power washer for more than one month, run Pump Saver through it.
See the section on Pump Saver for more information.
P
UmP
S
aver
Pump Saver is a product that protects and prolongs the life of the pump. This will keep the internal
parts of the pump lubricated and protected from freezing while being stored in ALL climates. It also
assists with protection from internal corrosion. The Blue Clean part # is: PW64511 (16oz. bottle).
Order online at www.arblueclean.com
Pump Saver Instructions
Follow the previous storage instructions for your power washer. To prevent staining, protect the
surface under the power washer from any excess fluid. Wear eye protection when using this product.
1. Turn off your power washer.
2. Disconnect garden hose.
3. Shake the bottle well before
connecting to the power washer.
4. Screw the garden hose adapter to
the Pump Saver Bottle.
5. Click onto pump inlet (clear quick
connect filter).
6. Turn the valve on the bottle to the
open position.
7. Turn the power washer on. Turn
the power washer off as soon as the
Pump Saver fluid begins to exit the
water outlet - nozzle.
8. Turn the valve on the bottle to the off
position and remove the Pump Saver
bottle valve assembly from the power
washer.
