Blue Clean AR 383 S, Инструкции по сборке, уходу и использованию

Страница: 10 / 52

10
OPERATING INSTRUCTIONS
• Turn the power switch to the “ON” (|) position. The
unit will turn on for 1 - 2 seconds and shut off.
This is a normal function of the auto start feature.
Squeeze the spray gun trigger to begin pressure
washing.
• Begin power washing by squeezing the trigger on
the spray gun all the way into the handle.
• Release the spray gun trigger to stop the power
washer
• Allow the motor to come to a complete stop before
squeezing the trigger again.
• Squeezing rapidly will cause the auto start feature
to miss an on/off cycle that may prevent it from
turning on while squeezing trigger after rapid
squeezing. Use slow deliberate trigger pulls to avoid
such symptoms.
OPERATING INSTRUCTIONS
OFF/0
ON/I
OFF/0
ON/I
2
2
IN position
IN position
High Pressure Setting
Fan Spray Pencil Stream
1
•
Always test
a small area to avoid chance of
damaging the surface.
Using High/Low Nozzle
• High pressure spray is used for cleaning and low
pressure spray activates the detergent function.
• The adjustable spray nozzle had has two (2)
positions:
– IN position for high pressure spray. Twist the nozzle
counterclockwise until it stops and gap is closed.
– OUT position for low pressure spray for detergent
function. Twist the nozzle clockwise until it stops
and gap is open.
• When using the high pressure setting, twist the
nozzle head clockwise or counterclockwise to achieve
the stream desired.
• When using the low pressure setting twist the nozzle
head clockwise to open the fan blades
all the way.