BCT-ETX-C3-XXX
S
INGLE
B
OARD
C
OMPUTER
U
SER
G
UIDE
Board Level Features
CPU:
VIA C3 800MHz/1Ghz (128KB L1 & 64KB L2 cache)
VIA Eden 266/400/733MHz (128KB L1 & 64KB L2 cache)
CPU Cooling:
Passive CPU heat spreader/ heat sink cooling for lower
performance parts
Chipset:
VIA PN133T Chipset including:
VT8606 North Bridge.
VT82C686B South Bridge.
BIOS:
Phoenix BIOS, with Ethernet Boot ROM option, BCT BIOS
extensions and INT calls
Support for APM and VIA Power Saver (Long-Haul) technology.
Customer Splash screen option available
Memory:
64MB to 512Mbyte PC133/100/66 SDRAM expansion using
horizontal 144 pin SODIMM.
3V3 only operation.
SPD scheme for SDRAM identification.
No Support for parity memory.
Cache:
128KB L1 and 64KB L2 Cache is integrated into the CPU
Solid State Disk
:
ADC (ATA Flash) site for onboard Flash optional. Note height when
fitted.
Onboard Peripherals:
Graphics:
Integrated AGP (x4) Graphics controller based on S3 Savage 4
CRT SVGA at 1600 x 1200 resolution.
Direct LCD support for STN, DSTN and TFT up to 18 bit
Dual channel LVDS for up to 18 bit panels
Selection between Direct LCD and LVDS is a build option.
8 to 32Mbyte of video memory (Shared Memory Architecture SMA)
Supports 848*480 & 1024*512 widescreen resolutions
Ethernet:
10/100 Base-T Ethernet using Intel 82551ER
Boot ROM option within the BIOS set-up for remote booting (PXE).
Note: the base board must carry the magnetic for network isolation
Storage:
ATA100/66/33 EIDE HDD (quad drives, dual connectors) provided by
South Bridge. 80 way cable detection incorporated.