23
FUNCTIONS USING MIDI NON-REGISTERED PARAMETERS
These functions apply to the different sound functions of the Baby b.. You can use the function on
each of the three midi channels. After you have set these functions, you can use the store function, to
store a preset.
You can also use this function with the CUBASE Mixermap. Please refer to chapter "Program Maps
for Cubase" in this manual.
SELECT THE DIFFERENT ORGANS
Drawbar B3/WERSI
B0 63 02 62 07 26 XX XX = 0,2
0=B3, 2=WERSI
Drawbar Main/Variat
B0 63 02 62 08 26 XX XX = 0,1
0=Main, 1=Variat
Use this Function to switch total parameter sets between 4 complete and complex drawbar organ systems:
Ham d B3 => B3 and the MAIN
Simulates the electromagnetic "Hammond B3" organ. Selected from the palatte of offerings by Laurens
Hammond, the B3 was first introduced in 1955. The B3, with its "dirty" sound has become a legend
among jazz musicians and rock artists alike.
Hammond B3 => B3 and the VARIATION
Simulates the electromagnetic "HAMMOND H100" organ.
WERSI Spectra/Atlantis => WERSI and the MAIN
The sound of the modern electronic WERSI entertainer organ. Developed by the german Franz family, the
WERSI organ has acclaimed appreciation because of it's crystal clear sound by artists in all areas of music.
The most famous representative of the WERSI organ series is the "one-man-orchestra" Franz Lambert.
WERSI Helios/Galaxis => WERSI and the VARIATION
This Organ was developed in the 70th and one of the famous WERSI organs.The most famous
representative of this WERSI organ series was Klaus Wunderlich.
ROTOR ON - OFF
MIDI Data:
B0 63 02 62 01 26 XX
XX = 0,1
0=Off, 1=On (Only for upper channel)
This button turns the ROTOR effect on and off. ROTOR is a simulation of the special amplifier cabinet
with mechanically rotating speakers, that was invented in the days of Tone-Wheel organs by Donald
Rotor. The rotating speakers resulted in a doppler effect, creating a complex waveform of frequency
and phase vibrati.
ROTOR SPEED SLOW/FAST
MIDI Data:
B0 63 02 62 02 26 XX
XX = 0,1
0=Slow, 1=Fast
Use this button to adjust the rotation speed (in a virtual sense) of the rotating speakers. Two speeds are
available. You can also user the footswitch to change the speed of the rotor. The "SLOW" setting gives
you a cathedral-like, swinging effect. The "FAST" setting results in a vibrato-like sound. If you change
the speed while holding a note or chord on your keyboard, your Baby b. simulates the actual slowing
or accelleration of the rotating speakers, a very complicated process electronically.
Note: You will only hear ROTOR when the "ROTOR ON" function is on.
Содержание Baby b.
Страница 56: ...56 MIXERMAP LOWER BASS MIXERMAP PROGRAM...
Страница 57: ...57...