Blue Bird Vision 2021, Руководство водителя

Страница: 62 / 210

2-50
D R I V E R S H A N D B O O K
To access all electrical wiring diagrams for your Blue Bird Bus
visit our Blue Bird Portal web site and enter your body number
which is located on the body serial and service number plate
above the windshield at:
https://vantage.blue-bird.com
Wiring Diagrams
Circuit Breakers & Fuses
The electrical system is protected by fuses as standard. Manual reset circuit breakers are optional. Body circuit breakers or fuses are located in
a side mounted electrical box below the driver’s window. Chassis circuit breakers or fuses are located behind a cover at the center of the bus
below the dashboard. If a current overload or “short” should occur in any circuit, it will blow the fuse or trip the circuit breaker. If a short occurs
and a fuse blows, the fuse will need to be replaced. If a circuit breaker breaks, the circuit breaker can be reset by pressing the tab located on
the breaker. A short may be indicated by blinking lights or fluctuating gauges. The shorted circuit should be corrected immediately. Refer to
body or chassis master wiring diagrams.
To access the electrical panel, open the access door located
outside the bus below the driver’s window. A reference decal is
provided on the inside of the access panel. Use of appropriate
amperage circuit breakers is required.
Accessories and Added Components
When adding accessories and aftermarket components, it is important
to consider the results very carefully.
• Does the component over burden the electrical system?
• Does the accessory interfere with any of the driver’s controls?
• Does the accessory interfere with the driver’s field of vision?
• Heavy components and accessories must be mounted near, or
below, the floor line to avoid raising the vertical center of gravity.
• Will passenger safety and comfort be adversely affected?