Blue Bird Vision 2021, Руководство водителя

Страница: 18 / 210

2-6
D R I V E R S H A N D B O O K
Emergency Exits
All emergency exits on this Blue Bird bus meet FMVSS specifications.
In true emergency situations, every second counts. It is therefore essential that every school bus Driver be completely familiar with the
location and operation of all emergency exits. Read the following descriptions thoroughly, but also practice operating each of the exits to
have not only a mental memorization, but also a tactile familiarity with the amount of force required to operate the opening, the amount of
space available around the opening, etc. Checking for proper operation of each emergency exit must be part of the daily pre-trip inspection
regimen.
Emergency exits are clearly identified with the words “EMERGENCY EXIT.” Basic operating instructions are also printed on labels affixed
on or near each exit.
The bus is equipped with an audible alarm that sounds when an emergency exit is unlatched and the ignition switch is in the RUN” posi-
tion. On the
VISION
, the DID screen also identifies the open exit(s).
⚠ ⚠
WARNING! WARNING!
All “Emergency Exits” should be inspected and tested daily. The labels and decals should be considered
part of this inspection and should be maintained in a clearly legible condition.
Emergency Door
The emergency door is opened by lifting the long horizontal handle all the way upward and pushing the door outward. The three-point lock
mechanism shown is optional. The door is equipped with a hold-open telescoping strut at the top of the opening. When the door is fully
opened, a pawl in this strut rotates to prevent the door from falling shut. To close the door, push it outward to the end of the strut’s travel.
This causes the pawl to rotate again, allowing the door to close. Close the door smoothly, push it against the frame firmly to compress its
seal, and close the handle latch fully.