BLUCAVE.COM
8
power tool, taking into account the
working conditions and the work to
be performed.
Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
5. Service
Have your power tool serviced by a
qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power
tool is maintained.
6. Safety warnings for chargers
Keep the Charger away from rain or
moisture. Penetration of water in
the Charger increases the risk of an
electric shock.
Only charge the Screwdriver
DSD-46FL-2-BLU in the Charger
marked DSDC-46FL-2-BLU.
Keep the Charger clean.
Contamination can lead to danger of
an electric shock
Before each use, check the Charger,
cable and plug. If damage is detected
do not use the Charger.
Never
open the Charger yourself. Have
repairs performed only by a qualified
technician and only using original
spare parts. Damaged charger, cables
and plugs increase the risk of an
electric shock.
Do not operate the Charger on easily
inflammable surfaces (e.g. Paper
textiles, etc.) or surroundings.
The
heating of the Charger during the
charging process can pose a fire
hazard.
Supervise children.
This will ensure
hat children do not play with the
Charger.
Children or persons that owing to
their physical, sensory or mental
limitations or to their lack of
experience or knowledge, are not
capable of securely operating the
Charger, may only use this Charger
under supervision or after having been
instructed by a responsible person.
Otherwise, there is danger of operating
errors and injuries.
ADDITIONAL SAFETY
INSTRUCTIONS for cordless
screwdrivers
Hold power tool by insulated gripping
surfaces, when performing an
operation where the fastener may
contact hidden wiring. Fasteners
contacting a “live” wire may make
exposed meal parts of the power tool
“live” and could give the operator an
electric shock
Hold the machine with a firm grip. High
reaction torque can briefly occur while
driving in and loosening screws.
Always wait until the machine has
come to a complete stop before
placing it down. The tool insert can
jam and lead to loss of control over the
power tool
Before any work on the machine (e.g.,
Maintenance, tool change, etc.) as
well as during transport and storage
set the rotational direction switch to
the centre position. Unintentional
actuation of the On/Off switch can
lead to injuries.
Protect the power tool against heat,
e.g., Against continuous intense
sunlight, fire, water and moisture.
Danger of explosion
In case of damage and in proper use of
the battery vapours may be emitted.
Provide for fresh air and seek medical
help in case of complaints. The
vapours can irritate the respiratory
system.
If possible, always use clamps or a vice
to hold your work.
Always switch off before you put the
tool down.
Ensure that the lighting is adequate.
Do not put pressure on the Screwdriver,
such that it slows the motor down.
