BLUCAVE.COM
10
for any damage resulting from such
changes.
Even when the tool is used as
prescribed it is not possible to eliminate
all residual risk factors. The following
hazards may arise in connection with
the tool’s construction and design:
Damage to the lungs if an effective
dust mask is not worn.
Damage to hearing if effective ear
defenders are not worn.
Your Screwdriver uses Flashcells to
store the energy that operates the
Screwdriver. Do not attempt to charge
the Screwdriver with any other charger
than the one supplied.
IT IS DANGEROUS
TO USE ANY OTHER CHARGER TO CHARGE
YOUR TOOL.
Do not attempt to charge any other
types of rechargeable batteries OR
non rechargeable battery cells with
this Charger.
If there is a problem with the Charger
or the tool, phone (479) 872-6767 and
speak with an experienced Customer
Service Representative for assistance
in rectifying your problem.
Before using the Charger, read all the
instructions, labels and cautionary
markings on the Charger and
Screwdriver.
Do not use the Charger if it has been
subjected to a heavy knock, dropped
or otherwise damaged in anyway.
Do not disassemble the Charger.
Opening or removing covers may
expose you to dangerous voltages or
other risks. Incorrect reassembly can
cause electric shock when you use the
tool or Charger again. Take the Charger
to an authorized service centre when
service or repair is required. Incorrect
re-assembly may result in the risk of
ADDITIONAL SAFETY
INSTRUCTIONS for the
charger
fire, electric shock or electrocution.
To reduce the risk of electric shock,
do not disassemble any part of the
product.
DANGER.
If the Screwdriver is cracked
or damaged in any other way, do not
insert it in the Charger
Do not plug anything other than your
Flashcell Screwdriver into the Charger,
as other objects may touch dangerous
voltage points or short out parts,
which could result in fire or electric
shock.
Do not place the tool or Charger on an
uneven surface, as a fall may cause
serious damage.
Never place the tool or Charger near or
over a heat source such as a radiator
or heater.
Do not operate the Charger in a cabinet
or other enclosure unless proper
ventilation is provided.
Use the Charger indoors only.
WARNING.
Do not allow any liquid to
come into contact with the Charger.
There is a danger of electric shock. Do
not position the tool or Charger near
water; for example, near a sink, wash
bowl or toilet. Do not spill liquid of any
kind on the tool or charger. Doing so
may short out parts, causing damage
to the product and creating the risk of
fire or electric shock.
If liquid has been spilled into the tool or
Charger, or if rain or water has touched
the Screwdriver or Charger.
If the tool or Charger does not operate
normally after you follow the operating
instructions.
If the tool or Charger has been dropped
or damaged.
If the tool or Charger exhibits a distinct
degradation in performance.
If the tool or Charger is damaged in any
way.
If the Screwdriver is not charged within
