Blu DASH C MUSIC, Руководство по обслуживанию

Страница: 2 / 42

2
INTRODUCTION
The purpose of this document is to help service workshop technicians to service products. This service manual
must be used only by authorized service suppliers. The content of it is confidential. Please note that provides
other guidance documents for service suppliers. Follow these regularly and comply with the given instructions.
While every effort has been made to ensure the accuracy of this document, some errors may exist. Please keep in
mind also that this documentation is continuously being updated and modified, so always watch out for the newest
version.
CAUTIONS
Please refer to the phone’s user’s guide for instructions relating to operation, care, and maintenance, which
include important safety information.
1
Servicing and alignment must be undertaken by qualified personnel only.
2 Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn.
3 Use only approved components as specified in the parts list.
4 Ensure all components, modules, screws, and insulators are correctly re-fitted after servicing and
alignment
5
Ensure all cables and wires are repositioned correctly Electrostatic discharge can easily damage the
sensitive components of electronic products. Therefore, every service supplier must observe the precautions
which mentioned above.
GENERAL REPAIR INFORMATION
1 Make sure your testing equipment is functioning properly before beginning repair work.
2 Before starting repairs you must observe ESD precautions such as being in your ESD protected area and
connecting your wristband.
3
Use gloves to avoid corrosion and fingerprints.
4 Cover windows and displays with a protective film to avoid dust and scratches.
5 Use a lint-free cloth to clean the LCD.
6 When cleaning the pads use a soft cloth\ESD brush and isopropanol. Do not use a glass fiber pencil: this
scratches the surface and will corrosion.
7
Non-faulty mechanical parts(except shielding lids and bent parts or soldered components).May be reused
if they are not soldered.
8
When removing the shielding lids make sure to replace them with new ones, otherwise the high-frequency
leakage can affect the device.
9
Always use the original spare parts.
10 Check the soldering joints of the parts concerned with regard to the fault symptom. And resolder them if
necessary.
11
Remove excess soldering flux after repair.
12 Observe the torque requirements when assembling the unit.
13 please aware that some malfunctions may be software related and solved by an update