Step 6.3
After mounting your fountain to the wall, fill the reservoir with water. The water level must be
maintained at least ¼” above the Water Pump (A). If the water level drops below the Water Pump
(A), damage may occur.
Step 6.4
You can now plug in your Water Pump (A) and LED Light (C) into your designated GFCI electrical
outlet.
Step 6.5
If necessary, slowly open the Flow Valve (B) to achieve a nice water flow. As water begins to flow
down the panel, you can guide the water using the provided Water Guiding Pad (I) to ensure that
water flows down the entire face of the panel evenly as shown in Fig 6.5. (Tip: Make sure when
guiding the water with the Water Guiding Pad (I) that your elbow is facing upward while guiding and
spreading the water across the panel during start-up. This will prevent water from running down
your arm).
Fig 6.5
Step 6.6
Place Reservoir Tray in the base, as shown in Fig 6.6 A & 6.6 B.
Fig 6.6 A – 6.6 B
