Step 2.2
Push the Flow Control Valve (B) into the Water Pump (A) output port as shown in Fig 2.2 A & 2.2 B.
Step 3.1
Locate the Water Diffuser (K) and place into the water collection channel as shown in Fig 3.1 A &
3.1 B.
Step 4.1
Disconnect the power cord from the LED Light (C), place it to the Light Tray (J) as shown in Fig
4.1A. Adhere one of Wire Clips (D) on the Light Tray (J) to guide the power cord to the hole on the
Light Tray (J), as Shown in Fig 4.1B.
Step 4.2
Lay the assembled Light Tray (J) onto the header as shown in 4.2A then push the tabs located on
the Light Tray (J) into the hem on the header as shown in Fig 4.2B and 4.2C.
Section
4
–
Light
Installation
Section
3
–
Water
Diffuser
Installation
Fig 4.1A
Fig 2.2 A- 2.2 B
Fig 4.1B
Fig 3.1 A & B
Fig 4.2 A-4.2C
