Blu-Comm BluComm-OTH, Руководство пользователя

Страница: 6 / 11

All rights reserved. www.blucomm.com 5
5. Power On / Off
a. To TURN THE UNIT ON, PRESS AND HOLD THE Function button for 5 seconds.
The power will turn on after the LED Indicator Light flashes the
blue light 3 times.
b. To turn the unit off, press and hold the Function button for 5 SECONDS UNTIL THE
RED Indicator Light flashes 3 times
.
NOTE:
·While turning the Headset on, you will hear a “Du Du” sound from the receiver. The
blue Indicator Light will flash 5 times, then 2 times, and after repeating this for 5 cycles,
the Indicator Light will flash the blue light every 3 seconds until the unit adjusts into
Standby mode.
·While the Headset is turned on, it will automatically search for the paired device. Under
the “ON” mode and within the effective range of
30 feet from the Headset, the Indicator
will flash the blue light to indicate that it entered the connecting mode.
·When turning the headset off, you will hear one “Bi” sound followed by two “Du” sounds,
then the Indicator will shut off after flashing the red light a few times.
6. Pairing the Headset with a Bluetooth Device
Before you use the Headset the first time, you must pair the unit with a Bluetooth device
i.e. cellular phone. To set up the pairing:
a. Insure your mobile phone is Bluetooth capable
b. Make sure the Headset is turned off.
c. Press and hold the Function button for 10 seconds until the Indicator Light flashes
alternating “Red – Blue – Red – Blue” to enter the pairing mode.
d. On your mobile device start the Bluetooth search function. Refer to the mobile
device manufacturer’s instructions regarding pairing the device to the
BluComm
Bluetooth Headset.
e. When your mobile device is in the stage of searching for a new Bluetooth device, it
should locate and pair with the BluComm
f. On your mobile device, please choose and confirm the BluComm as your
Bluetooth paired device.
g. Key in the Headset Passcode-“0000” and press “YES”. If the pairing is successful,
the Indicator light on the Headset will flash the blue light only. For some mobile
phones, after pairing you may have to select and reconfirm BluComm PAIRING
EACH TIME YOU TURN ON THE PHONE. Please read you phone manufacturer’s
instructions regarding Bluetooth devices.
h. The Headset should now be in standby mod – ready to send and receive calls.
NOTE:
If the pairing is not successful the first time, the Headset will return to standby mode.
Please repeat the pairing process and refer to the mobile device’s manufacturer’s
instructions for additional information.