2
Installation Requirements
Please read the instructions carefully so as to avoid any damage to the fixture.
1. To ensure this product is installed properly, you must read and follow these guidelines.
2. The owner/user of the product must keep this information for future reference.
3. Consult local building codes to make sure the installation complies with standards.
4. Remove the unit from its packaging. Before disposing of it, inspect the unit to make sure its in good shape.
Should inspection reveal any damage or defect in the finish, contact your distributor. The warranty does not
cover damages or defects in the finish once it has been installed. Blu Bathworks’ responsibility for shipping
damages ceases upon delivery of the product in good order to the carrier. All complaints regarding damage
due to transport must be made directly to the carrier.
5. Place the unit in the bathroom before you start working. Conserve all nuts and bolts.
6. To protect the unit during installation, we recommend that you lay a piece of cardboard on the bottom.
7. If the unit is covered with polyethylene protective film, do not remove until installation is complete to grant
maximum protection. However, remove film where any two surfaces will be in permanent contact.
8. Verify that all dimensions on the plan are the same as the ones of the unit.
9. All installations must conform to local and national plumbing, building and fire codes.
10. Inspect this product to assure you have all parts required for proper installation.
Attention
DO NOT USE IN-TANK BOWLCLEANERS.
The use of high concentration of chlorine or chlorine-related products can seriously damage fittings in the tank.
This damage can cause leakage and property damage. Blu shall not be responsible or liable for any tank fitting
failure or damage caused by the use of in-tank bowl cleaners.
Operation (Note to Owner)
You have chosen a Blu product that is superior in quality and craftsmanship. Our toilet flushing systems are the
best in the industry. To ensure that your toilet is performing correctly, always flush the toilet with a full stroke of the
trip lever to activate the flushing cycle. A full stroke will guarantee that you are flushing with the power of a Blu.
Cleaners for Fittings and Accessories
To avoid damaging the surface and working components of the fittings, certain precautions
must be taken in terms of usage and subsequent cleaning as many cleaning agents contain
acids for general cleaning and removing calcium deposits. When caring for your fittings and
accessories, please note the following:
- Only apply cleaners which are expressly intended for the use
- Never use any cleaner containing hydrochloric acid, formic acid or acetic acid on or near the fitting, as they can
cause considerable damage even with just one application
- Do not use cleaners containing phosphoric acid
- Do not use cleaners containing chlorine bleach solutions
- Never mix or combine cleaning agents
- Abrasive cleaners and unsuitable scouring agents such as scouring pads.
