I2
II
MOBILE OPTION:
If you have a JAVA enabled cell phone you can access the system from just about anywhere.
Just use your phone’s web browser to download and install the application from
http://badger.xanboo.com/mobile/
and enter your
Home Monitoring User ID
and
Password
when
prompted. Data rates will apply, so you may want to consider subscribing to a data package.
XG1000 CONTROLLER REAR PANEL
ETHERNET CONNECTOR
ANTENNA
CONTROLLER REBOOT BUTTON
POWER CONNECTOR
BOOT SEQUENCE
When the controller is first powered up, the bottom five LED’s on the front panel go
through a boot-up sequence. The lights start out as
Red
, go to
Amber
and then
Green
.
The process takes about three minutes.
REAR PANEL:
The rear panel of the controller contains the ports for cable connections. The bottom round port
is for the power. The AC adapter is plugged into this port. The other port is for the network cable.
A standard Ethernet cable is connected between this port and your router.
The antenna on the back panel is used for communication between the controller and
the wireless devices. It should normally be placed in an upright position. If you are having
communication problems with sensors (as indicated on the
“Monitor” page
) you should try
repositioning the antenna slightly.
If you are unable to access the controller, you may need to reboot the unit. There is a recessed
button on the back labeled
‘REBOOT’
. This button will reboot the controller while retaining all of
the internal settings. You can use the white reset tool that comes with each sensor device to
activate this button. The system will go through the normal boot sequence.
Содержание Home Monitoring Starter Kit
Страница 1: ...STARTER KIT USER S MANUAL...