Blonder tongue SDE-6S-ASI Скачать руководство пользователя | Manualshive

Страница: 6 / 40

background image

6 SDE-6S-ASI

User Manual

Section 2 — Product Summary

2.1 Revision History & Reason

This is the first issue of this Instruction Manual.

2.2 Product Application & Description

Application:
SDE-6S-ASI (MPEG-2 SD Encoder/Multiplexer – 6xSD-SDI/6xNTSC – 2xASI/1xIP)

accepts up to six (6) standard-definition

(SD) programs from any of the following inputs: 6xSD-SDI, and 6xNTSC. MPEG-2 encoded outputs are multiplexed into one

Multi- Program Transport Stream (MPTS) which is available in the following formats simultaneously: 2x, and 1xIP (100/1000

Base-T).
The encoder supports Dolby® Digital audio encoding for (16) analog stereo audio pairs (L+R) which in addition to primary

and secondary audio programs also provide a third audio pair for the Audio Descriptor Service, an additional narration track

for blind and visually impaired, as mandated by the Twenty-First Century Communications and Video Accessibility Act of

2010 (CVAA).
Ad insertion SCTE 35 compliant queuing messages are detected for each program from either the audio Cue Tone input or

a contact closure (operator selectable).
A baseband audio analog encoding capability table is provided in Section 2.3 (page 12) for easy reference. In addition to the

baseband audio analog encoding capability audio programs that are already encoded and present on the SDI inputs may

be multiplexed with the respective output (pass-through) without utilizing the baseband audio analog encoding resource.
The encoder also supports Closed Captioning (EIA-608, and EIA-708), and Emergency Alert System (EAS). A front-panel DVI

port is available for real-time monitoring of active programs during operation.
Comprehensive remote monitoring and control is accomplished using any standard Web browser via a rear-panel SFP port

(10/100BaseT).

Features:

• Accepts up to six (6) video programs from any of the following inputs: 6xSD-SDI and 6xNTSC

• Simultaneously delivers the following outputs: 2xASI (mirrored) and 1xIP

• Provides comprehensive GUI-based monitoring and control via standard Web browsers

• Provides audio encoding for Primary Audio, SAP (Secondary Audio Program), & Audio Descriptor Service

• Provides ad messaging via SCTE 35 activated by either Cue Tone Audio input or upon contact closure (user selectable)

• Supports Closed Captioning EIA-608 and EIA-708

• Supports Real-time Dolby® Digital audio encoding

• Supports Emergency Alert System (EAS)

• Supports user-defined static PSIP configuration

• Supports Dolby® Digital (AC3) compressed audio pass through on all SDI inputs. pass through for all SDI inputs

• Software upgradable to 2XHD-SDI or 8XSD-SDI (requires 6366-LIC).

Dolby® is a registered trademark of Dolby Laboratories.

«
...
4
5
6
7
8
...
»

Содержание SDE-6S-ASI









































Отзывы:

Нет отзывов

Похожие инструкции для SDE-6S-ASI

Бренд: B&B Electronics Страницы: 13

Бренд: Sencore Страницы: 112

Бренд: April Music Страницы: 11

Бренд: Peachtree Audio Страницы: 56

Бренд: Gbxpoint Страницы: 4

Бренд: Vitek Страницы: 32

Бренд: FBS Страницы: 6

Бренд: KONANlabs Страницы: 6

Бренд: CyberPower Страницы: 1

BrightSign MH6-HD

Бренд: Audio Authority Страницы: 8

Бренд: Sollae Systems Страницы: 70

Бренд: NAIM Страницы: 43

Бренд: l-com Страницы: 2

Бренд: Video Messenger Страницы: 25

Бренд: Kipp & Zonen Страницы: 66

Бренд: MAKINEX Страницы: 24

Бренд: TFT Страницы: 3

Бренд: IMC Networks Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды