Blonder tongue NeXgen, Руководство по настройке и конфигурации

Страница: 6 / 8

6 NeXgen Platform Base
Quick Guide
Step 5: Basic Configuration (continued)
Go to the “System” tab to change the System Settings, including: Unit Name and Unit Location. The following Ethernet
Settings can also be changed: IP address, Subnet Mask, Default Gateway, and the Primary and Secondary DNS.
Click “Apply” in order to save the new settings.
Troubleshooting
For technical support please contact us at 1-800-523-6049 between the hours of 8am and 5pm EST.
Please refer to the operation manuals of each module for additional information.
After the hardware installation of any additional modules, go through the control panel and set up each module slot to
configure your NeXgen application. Please refer to the user manuals of each module for in-depth configuration.
Step 6: Module Configuration
Module Slot Tabs
are accessed here.
REMINDER
If the IP Address is changed, the procedure in Step 4 must be repeated using the new IP
address in place of the default IP address in order to reaccess the control panel.