26 HDE-4C-QAM
Instruction Manual
5.10 "Main > Output" Screen
The “Main > Output” screen (Figure 5.10) is a “read and write” screen to assign each TS to their desired IP, QAM, and ASI
outputs:
Figure 5.10 - "Main > Output" Screen
In the section entitled “TS” under an orange header, the following parameters about each output TS are displayed:
TS Mapping: indicates the list of programs selected by the user to be assigned to TS (TS #1 thru 4). The program
information includes the PMT PID, Program number, Short Name, Major-minor channel number. For example, TS1
indicates a SPTS with TS ID 1. For program P1 [100 (1) (DVD) (3-1)] the following information is displayed:
100 – indicates the Program MAP Table (PMT) of the program.
1 – indicates the Program number as assigned in of Section 5.7.
DVD – indicates the Short Name as assigned in of Section 5.7.
3-1 - indicates the Major – minor channel number as assigned in and
of Section 5.7.
101 V: Comp 1 – indicates that the input video source is Component 1 and the elementary stream PID is 101.
102 A: Audio In 1 – indicates that the input audio source is Audio In 1 and the elementary stream PID is 102.
Bitrates: indicates the transport stream bitrate and the TS Bitrate (refer of Section 5.7 for details).
In the section entitled “Output” under blue header, the following parameters about each output TS are displayed:
IP: select the IP address, and the port number to which a TS is assigned (see of Section 5.8 for details).
QAM: select the QAM RF channel number of the QAM output (see of Section 5.9 for details).
ASI: select the physical ASI OUT port number to which a TS is assigned.
7
8
9
10
2
1
2
1
2
3
4
5
1
2
3
4
5
