Blonder tongue BTPRO-7000, Инструкция по эксплуатации

Страница: 30 / 48

30
TonE piLoT 1 - MoDuLATion
Using the Standard Navigation Mode, select MODUL and set the desired modulation for
the master test tone to be upstreamed. The possible selectable modulations are 8 QAM, 16
QAM, 32 QAM, 64 QAM, QPSK. Press ENTER to confirm.
TonE piLoT 1 – SyMBoL rATE
Using the Standard Navigation Mode, select SYM. RATE and set the desired Symbol Rate for
the generated master test tone to be upstreamed. The selectable Symbol Rate values are 16,
32, 64, 128, 512, 256 kS/s, Press ENTER to confirm.
TonE piLoT 1 - DurATion
Using the Standard Navigation Mode, select DURATION and set the desired duration of the
upstreamed master test tone. You can set to send the tone for 1, 5, 10, 30 seconds or choose
Continuous to send an uninterrupted, continuous master test tone. Press ENTER to confirm.
TonE piLoT 1 - ToGLE
Using standard navigation, select Toggle.
Set to DISABLE to send a single frequency tone, and press ENTER to confirm.
Set to ENABLE. The menu for secondary test tone will be displayed and the duration of the
master test tone will be automatically set to Continuous.
TonE piLoT 2 - FrEQuEncy
Using the Standard Navigation Mode, select FREQUENCY and set the desired frequency for
the secondary test tone. Press ENTER to confirm.
TonE piLoT 2 - LEvEL
Using the Standard Navigation Mode, select LEVEL and set the desired level of the
secondary test tone. Press ENTER to confirm.
TonE piLoT 2 - MoDuLATion
Using the Standard Navigation Mode, select MODUL and set the desired modulation for the
secondary test tone to be upstreamed. The possible selectable modulations are 8 QAM, 16
QAM, 32 QAM, 64 QAM, QPSK. Press ENTER to confirm.
TonE piLoT 2 – SyMBoL rATE
Using the Standard Navigation Mode, select SYM. RATE and set the desired Symbol Rate for
the generated secondary test tone to be upstreamed. The selectable Symbol Rate values
are 16, 32, 64, 128, 512, 256 kS/s, Press ENTER to confirm.
TonE piLoT 2 - DWELLinG
Using the Standard Navigation Mode, select Dwell and set the desired dwelling time for the
secondary test tone. You can set 0,5, 5, or 10 seconds. Press ENTER to confirm.
TonE GEnErATor
With the Standard Navigation Mode, highlight the START? Item and press the ENTER key to
start sending the test tone. While sending the test tone, you can stop the tone by selecting
the STOP item and pressing the ENTER key.