14
BT-HE-DASHBOARD
User Manual
Unit:
Clicking on “Unit” will take the browser to the Log-in page of the particular encoder. Placing the cursor over “Unit”
will display a pop up with key encoder information as shown in Figure 4.1b.
Username & Password:
User entry for each encoder for record keeping purposes.
Test Login:
Tests the listed Username and Password to determine if they are valid or not.
4.4 “Credentials” Screen
1
2
3
Figure 4.4b - Login Credentials Accepted
Figure 4.4c - Login Credentials NOT Accepted
Units that were previously detected by the DASHBOARD but are no longer connected will be highlighted in red, as
shown below.
Figure 4.4d - Disconnected Units
Remember to click on the “SAVE” button to apply the new values/configurations.
Figure 4.4a - “Credentials” Screen
1
2
3
