background image

EN

52

will go off and the relevant Programme 

follow-up light will come on according to 

the selected Programme.

Changing the delay time

If you want to change the time during 

the countdown:

1. Press “Start/Pause/Cancel” button. 

“:” in the middle of the screen will stop 

flashing.

2. Pres “Time Delay” button to adjust 

the desired time delay.

3. Press “Start/Pause/Cancel” button.

4. The “:” in the middle of the displayed 

time delay will start flashing.

Canceling the time delay

If you want to cancel the time delay 

countdown and start the Programme:

1. Press “Start/Pause/Cancel” button. 

The “:” in the middle of the displayed 

time delay will stop flashing.

2. Pres “Time Delay” button to decrease 

the time delay. “0:00” will appear on the 

display.

3. Press "Start/Pause/Cancel" button to 

start the Programme.

Starting the Programme

1. Press "Start/Pause/Cancel" button to 

start the Programme.

2. Programme follow-up lamp showing 

the startup of the Programme will light 

up.

Progress of Programme

Progress of a running Programme 

is shown through the Programme 

follow-up indicator. At the beginning 

of every Programme step, the relevant 

indicator lamp will light up and light of 

the completed step will turn off. The 

indicator that is lit up at the far right of 

the series of indicator indicates the step 

that is being carried out.

C

  If the machine is not spinning, 

the Programme may be in rinse 
hold mode or the automatic 
spin correction system has been 
activated due to an excessive 
unbalanced distribution of laundry in 
the machine.

Changing the selections after 

the Programme has started

Turning the Programme knob while the 

Programme is in a normal flow will not 

change the Programme.

Switching the machine to standby mode

Press “Start/Pause/Cancel” button 

momentarily to switch your machine 

to the standby mode. “Start/Pause/

Cancel” lamp will start flashing to 

indicate that the machine is switched to 

standby mode.

Selecting or canceling an auxiliary function 
in standby mode

Auxiliary functions can be cancelled or 

selected in accordance with the step the 

Programme is at.

Adding/removing laundry in standby mode

The door can be opened if the water 

level is suitable. “Ready” lamp will 

flash until the door is allowed to open. 

“Ready” lamp will light up continuously 

when the door is allowed to open. 

Laundry may be added / taken out by 

opening the door. “Ready” lamp goes 

off it he front door is not allowed to open 

for safety reasons.

Door lock

The loading door can not be opened yet 

due to safety reasons while the “Ready” 

lamp is flashing. The loading door can 

be opened once the “Ready” lamp 

starts lighting up continuously.

Child-proof lock

This function protects the appliance 

from being tampered by children. In 

this case, all of the buttons are inactive 

except On/Off button; by On/Off button 

you can whether stop or resume (while 

child-lock on) the Programme of your 

machine.

The machine is switched to child-lock 

by pressing the 1st and 2nd auxiliary 

functions for 3 sec. “C on” (Child lock is 

activated) label appears on the screen.

Содержание WMT 7310

































































Отзывы: