Blomberg GSN 9580 A, Инструкция по эксплуатации, Страница: 33 / 44

31
GB
If you did not turn of the audio signal of
your dishwasher by setting the Volume
to 0, then it will warn you with the
melody you have selected. You may
mute the audio warning by pressing
any button except the “Start/Pause/
Cancel” Button or by opening the
door. The audio warning will also stop
automatically after 2 minutes.
Child (Key) Lock
You may prevent other people to
interrupt and change the program cycle
and delay time while the dishwasher is
running.
Press “Time Delay” and “Con fi rmation”
buttons together for 3 seconds after
the program has started. “Enabling Key
Lock...X” will appear on the display,
where X indicates the time (in seconds)
during which the buttons need to be
kept pressed. All buttons are locked
at the end of this period, “
Keylock
Activated ” will appear on the display
and relevant indicator (12) will turn on.
All buttons will be nonfunctional when
child lock is selected.
To deactivate the child lock:
Press “Time Delay” and “Con
fi rmation”
buttons together for 3 seconds.
“Unlock...X” will appear on the display,
where X indicates the time (in seconds)
during which the buttons need to be
kept pressed. Key lock is deactivated
and “
Keylock Deactivated ” message
is displayed at the end of this period.
Key lock Indicator turns off.
Warning Messages
Your machine will give you some
important feedbacks while it is running.
Remove your fi lter and clean it under
running water. If there is remained
water in the tank, perform the
Cancellation and have the water in
the tank drained. Clean any leftover
deposits that have piled up in the
bottom of the tank, blocking the
water path. Clean the interior of your
machine and the tank by running a
prewash program without detergent or
a long washing program with detergent
based on the degree of dirtiness.
Please always make sure that you
scrape the large food remnants on
your dishes into a dustbin using a fork,
paper towel or a napkin before placing
them into the machine.
1. Make sure that the water is not
cut-off.
2. Make sure that the tap is open.
3. Call the service if water is not cut-
off and the tap is open.
It is possible that your machine has
taken in plenty of water due to various
reasons. Call the service.