Blomberg GSN 9580 A, Инструкция по эксплуатации, Страница: 31 / 44

29
GB
Display mode menu contains Eco and
Nrmal options. If you select Eco, your
dishwasher will decrease the screen
brightness automatically after a while
and save energy. If you select Nrmal,
screen brightness will not be changed.
Factory Settings
Proceed as indicated below to cancel
all your settings and restore the factory
settings:
1. Enter into the “Settings Menu”
(Press Function and Time Delay
Buttons together for 3 seconds)
2. When the Main Menu is displayed,
keep the Function Button pressed
until “Restore Factory Settings? is
displayed.
3. Factory Settings menu do not
have any submenus and it is
enough to press “Con
fi rmation
Button” to reset the settings.
4. Exit the menu after “ ** Stored! ** ”
is displayed.
When Factory Settings? menu is
selected, following values will appear:
Language = English
Screen Brightness = 2
Contrast = 2
Display mode = Nrmal
Volume = 1
Water Hardness = 3
Melody = 3
Scheduling the washing time
Time Delay
You can delay the start of the selected
program until 18 hours. Delayed
start can not be set after the program
starts. The selected program must not
be started in order to be able to set the
delay time.
1. Press Time Delay Button (
5 ) to enter
into the “Time Delay” menu.
2. Screen Information Line will display
“0:00” and Sandglass ( 19 ) will start
fl ashing.
3. Press Selection Buttons (> - <) ( 7 )
to set the desired delayed start time.
“>” button increases the delayed
start time by 30 minutes and “<”
button decreases the delayed start
time by 30 minutes.
Press “Start/Pause/Cancel” button ( 3 )
to start countdown for the delay time.
Sandglass will continuously light until
the end of countdown. Remaining Time
Indicator will display the Delay Time.
Selected program will start automatically
when the countdown is over. Then,
the time needed for completion of the
running program will be displayed on the
screen.
Press Delayed Start ( 5 ) button again
to return to the “Main Menu” (program
selection screen) without setting any time
delay in the Delayed Start Menu.
Con fi rmation Button does not have any
function in the Time Delay menu and the
system will not react when you press it.
Changing a program or function
during delayed start:
Press Start/Pause/Cancel Button to
switch the dishwasher into pause
mode. Countdown stops and Sandglass
indicator starts
fl ashing. (When you
press the buttons without switching the
dishwasher into pause mode,
Time
Delay Active ! warning will be given)