Blomberg DWT 23100 B, Руководство по установке, Страница: 25 / 26

22
USA
8. INSTALLER CHECKLIST
Your installer must have completed and
checked the following:
The dishwasher is square and level.
•
The dishwasher is fastened securely to the
•
cabinetry.
The dishwasher door opens and closes
•
freely. The dishwasher door must close
without hitting any cabinetry or counter top.
The inlet water supply is turned on and
•
checked for leaks.
The drain hose has been connected and
•
checked for leaks. There must be no kinks
or obstructions in the drain hose.
The drain hose must be installed with a 28"
•
(710mm) high drain loop for drain hook-ups
without any air removed.
If the dishwasher drain is hooked up to a
•
garbage disposal, the drain hopper plug
must be removed.
The spray arms are free and rotate freely.
•
The rinse cycle has been run.
•
The water level will be below the filter
•
screen after the end of the wash program.
It is normal to find some water in the drain
filter area.
Set the water softener to the correct water
•
hardness for your area. If the dishwasher
drain is connected to a garbage disposal,
make sure that the drain/hopper plug has
been removed.
9. FINAL INSTRUCTIONS
1. Press the On/Off button to turn the
dishwasher on.
2. Power indicator light comes on.
3. Use the Program Select button to choose a
washing program.
4. Start the program with the Start/Pause/
Cancel button.
5. Run the dishwasher through one complete
cycle. When the wash cycle is completed, use
the On/Off button to turn the dishwasher off.
Notice :
If the dishwasher does not operate properly,
refer to the self help hints.
10. SELF HELP HINTS:
The screen does not come on:
Check to make sure the breaker to the
•
dishwasher is in the on position.
Check to make sure that the Supply cord
•
is plugged.
No Water is coming into the dishwasher:
Check to make sure the hot water shut-
•
off is in the ON position.
Water does not drain:
Make sure drain hose is not kinked or
•
comes out of air gap next to the sink.
Remove drain hose from disposal making
•
sure plug is removed.
Notice :
If your dishwasher is not operating
•
properly after following these steps:
Contact your dealer to schedule an
authorized service agent to inspect your
new dishwasher for any function related
failure.
The manufacturer warranty does not
•
cover installation, conversion or customer
education service visits.
DWT xxxxx xxxxx
uSM or uF5
You will find the model and serial number
information on the label located on the
right-hand side of the inner door of your
dishwasher, as shown above.
Notice :
Please make a copy of your invoice and
keep it with this manual and register your
dishwasher on-line.