Blomberg DWT 23100 B, Руководство по установке, Страница: 18 / 26

15
USA
7.3 ADJUSTING THE MOVABLE TOE KICK
Now that you have successfully installed the dishwasher, you
need to attach the toe kick to the dishwasher. The two piece toe
kick can be adjusted to the height and depth needed for your
kitchen. Be sure to use the slotted toe kick in the front and the
other behind it. They slide into each other.
1. Insert the movable toe kick brackets into the channel ( A ).
2. Make sure that the plastic tab to the left of the “L” opening on
the dishwasher has not closed the channel you will push the
bracket through.
Notice :
Be sure to notice there is a left and a right bracket.
Adjust the toe kick brackets forward or backwards so that they
will align with the kitchen toe kick (
B
).
Lock the toe kick brackets as shown with the plastic tab in the
figure C by pushing the plastic tab on the dishwasher into the
teeth of the bracket (
C ).
3. Now attach the toe kick to the bracket with the two (Ø 3/16” x
1/4” - Ø 4mm x 6mm) screws and the caps provided as follows.
Ø
1/8
"
(3,5mm)
Ø
1/8
"
(3,5mm)
A
B
C
7.2 READJUSTING FOOT
LEVELS
Now that the dishwasher is in the
cabinet you must readjust the feet to
bring the dishwasher up to the required
height and attach it underneath the
countertop.
1. Readjust the front foot levels with
adjusting wrench to balance the
dishwasher and raise it up under the
countertop, make sure the unit is level.
2. Readjust the rear foot levels with a
screwdriver to balance the dishwasher
and raise it to the required height using
the brackets supplied.
3. Attach the dishwasher underneath
the countertop with the four screws
supplied (Ø 1/8” x 1/8” - Ø 3.5mm
x 14mm). Make sure you do not go
through the top of the countertop or
damage granite.