Blomberg BRFB1045 Series, Руководство пользователя

Страница: 7 / 48

Compliance with RoHS Directive :
• The product you have purchased complies with EU RoHS
Directive(2011/65/EU). It does not contain harmful and
Package information
• Packing materials of The product are manufactured from
recyclable materials in accordance with our National
Environment Regulations.Do not dispose of the packaging
materials together with the domestic or other wastes.
Take them to the packaging material collection points
designated by the local authorities.
EN 6
Adjusting the legs
If your refrigerator is unbalanced;You can balance your
refrigerator by turning its front legs as illustrated in the
you turn in the direction of black arrow and raised when
you turn in the opposite direction.Taking help from someone
to slightly lift the refrigerator will facilitate this process.
Changing the illumination lamp
To change the Bulb/LED used for illumination of your
refrigerator, call your Authorized Service. The lamp(s) used in
this appliance is not suitable for house hold room illumination.
The intended purpose ofthis lamp is to assist the user to place
food stuffs in the refrigerator food stuffs in the
refrigerator/freezer in a safe and comfortable way.The lamps
used in this appliance have to withstand extreme physical
conditions such as temperatures below -20 °C. (only chest and
upright freezer)
Electrical connection
WARNING:
Do not make
WARNING:
Damaged power
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be installed
side by side there should be at
1.5 inches distance between
them.
conection via extension cable or
multi-plus.
• Our company shall not be liable for any damages that will
arise when the pro duct is used eith out grounding and
electrical connection in accorddance with the national
regulations.
• Power cable plug must be with in easy reach after installation.
• Do not extension cords or cordless multi outlet between
your product and the wall outlet.
Hot Surface Warning !
Side wall of your product is equipped
with refrigerant pipes to improve the
cooling system. Refrigerant with high
areas, resualting in hot surfaces on the
side wall this is normal and does not
need any servicing.Plase pay attention
while touching these area.
Connecting the water hose to the refrigerator
• Connect the water line to a water supply valve.
If a valve is not present or you are not sure, consult
a qualified plumber.
Connecting the water line to the water supply
1. Slip the union (B) on to the water hose (A)
2. Push the water hose downwards firmly to slip it onto the
water inlet valve (C).
3.Tighten the union (C) by hand to ecure it onto the water
inlet valve.Normally, you are not required to tighten the
union with a tool.However, you can use a wrench or pliers
to tighten the union if there is a leakage.
WARNING:
Connect to potable
water supply only.
WARNING:
Fill With Potable
Water Only.
DANGER:
Risk of fire or explosion Flammable
refrigerant used. do not use mechanical devices to
defrost refrigerator. Do not puncture refrigerant
tubing.
CAUTION :
Risk of fire or explosion.
Flammable refrigerant used. Consult repair
manual/owner’s guide before attempting to
service this product. All safety precautions
must be followed.
CAUTION :
Risk of fire or explosion.
Dispose of properly in accordance with federal
or local regulations. Flammable refrigerant
used.
CAUTION :
Risk of fire or explosion due to
puncture of refrigerant tubing; Follow
handling instructions carefully. Flammable
refrigerant used.