Blocks One
3D Printer User Manual
www.blockstec.com | [email protected]
8
CARE AND MAINTENANCE
CLEANING AND LUBRIFICATION
1.
Depending on your use of Blocks one 3D printer its advisable to clean the rods using
a soft fabric cloth at least once every two months.
2.
After cleaning the rods apply a small drop of sewing machine oil.
CLEANING THE NOZZLE
1.
Press the Knob and go to Control
!
Temperature
!
Nozzle.
2.
Rotate the Knob to select 220ºC, wait until it reaches the temperature.
3.
Remove the plastic from the nozzle using a pair of tweezers.
4.
Repeat Step 1 and select 0ºC.
UPDATING THE FIRMWARE
We are constantly updating the firmware, adding new features and correcting bugs. It’s
advisable to keep up with our updates subscribing to our newsletter and our facebook..
1.
Download latest firmaware (
http://www.blockstec.com/one.html
).
2.
Install arduino IDE (
www.arduino.cc/en/main/software
).
3.
Open the latest firmware using arduino IDE.
4.
Connect usb cable.
5.
Press upload on arduino IDE.
6.
When the process is complete disconnect the usb cable.
7.
You have just updated your Blocks one firmware.